Saxlund supplied a system comprising of an overhead crane, screening and conveying for a 125MWth Biomass Power Station in Wales.
Case study
Biomass power plant in Margam Great Britain
Babcock & Wilcox Vølund has built a biomass power plant in Wales for waste wood with a heat output of 125 MW. For this purpose, Saxlund supplies the conveyor systems from the storage with 2 portal crane systems and the entire conveying path into the boiler.
The shredded waste wood is delivered by truck. Two portal cranes distribute the fuel in storage and supply the receiving bin. A screw bottom underneath the funnel discharges the material and feeds it to a disk separator. The material flow can be bypassed by means of a distribution flap in the bypass chute.
Screw conveyors distribute the wood chips to one of the two conveyor lines, each consisting of 3 trough chain conveyors. The wood chips are conveyed from the storage building into the boiler house via the trough chain conveyors and distributed to the boiler feed funnel on three points each.
Technical data
Client
Year
2017
Material
Wood chips from wood waste
Bulk density
185-300 kg/m³
Particle size
P63
Humidity
15...35 %
Equipment
2 Portal cranes
Wheel base
25000 mm
Conveying rate
420 m³/h per crane
1 Receiving funnel with Discharging Screw
Silo capacity
52 m³
Discharge rate
184 m³/h
4 Discharge screw, type
DA
1 Collection screw, type
TM
1 disk separator
Conveying rate
184 m³/h
Width
1200 mm
2 Distributor screws
Conveying rate
184 m³/h per screw
Screw type
TAZ mm
2 Through Chain Conveyor lines with steel structures
Diese Website verwendet Cookies, um Ihnen das beste Erlebnis zu bieten. Durch die weitere Nutzung dieser Website stimmen Sie unseren Cookie-Richtlinie.